CDF Core Products
PRODUCTS FOR PAILS
CDF has the industry's most comprehensive selection of pail liners, pail lids, pail covers and pail trays.
Since 1971, CDF has delivered a wide range of solutions: from tough, leak-proof, vacuum-formed inserts, to economical, round-bottom liners, to the special protection of barrier-film pail liners.
Typical Pail Markets
PailSaver™ Liners for Plastic and Steel Pails
PailSaver plastic pail liners and PailSaver steel pail liners are ideal for mixing, pumping, storing and shipping many liquids powders and pastes. The PailSaver plastic pail liners are available in 2, 3.5 and 5 gallon sizes. The PailSaver steel pail liners are available in 2.5, 3.5, 5, 6 and 12 gallon sizes.
The seamless, vacuum-formed pail liners have a contoured lip that snaps over a pail's top bead to prevent leakage between the pail liner and the pail wall. After use, simply lift out the pail liner - the pail is clean and ready for reuse!
All pail liners are manufactured using FDA approved materials.
PailSaver pail liners are available in anti-stat. Anti-stat additives help to reduce static build-up in static sensitive applications, such as paints, volatile materials and fine powders.
The Smart Pail was developed specifically for high viscosity products. The Smart Pail is a thin vacuum formed plastic liner with a hermetically sealed plastic lid, corrugated box and corrugated lid. End user removes corrugated lid, peels back sealed plastic lid, then pumps or trowels product.
LinerPro™ Round-Bottom Liners
LinerPro round bottom pail liners provide an economic solution for protecting your products. Heat-sealed LinerPro round bottom pail liners can be used for shipping or storing nearly any wet or dry product, viscous or thin liquid, powder, particulate or paste.
Special models are intended for use with solvents, flammable powders, hot liquids, oxygen-sensitive or hygroscopic materials or aggressive chemicals.
PailSaver™ Trays and Cradles
PailSaver trays and cradles offer innovative packaging solutions for the steel pail. PailSaver cradles and trays keep two-part packages separated until combined by the end user. Examples of two-part packages include, epoxy hardeners and epoxy paints.
Cradles and trays allow the two parts to be contained and shipped in a single package. All PailSaver pail lids, cradles and trays are vacuum-formed from FDA approved materials.
Dust Caps and Cover Sheets
Dust caps and cover sheets shield materials from dirt, dust, moisture, insects and other contaminants during and in-between production.
Dust caps and cover sheets are ideal for protection of electronics, chemicals, inks, paints, pharmaceuticals and food.
Exterior pail lids protect the outside of the pail cover from external contamination and moisture.
EZ-Strainer™ Inserts for Pails
EZ-Strainer inserts lie on the top of any pail, allowing valuable material to be poured through easily, while removing unwanted particles. The patented lip design ensures that the strainer always stays in place.
EZ-Strainer inserts are ideal for removing debris from paints, inks, adhesives, silicones, etc. The 5-gallon EZ-Strainer inserts are available in coarse, medium and fine mesh.
Prior to use, the user shall independently determine the suitability of the products for the user’s intended use and user assumes all risk and liability whatsoever in connection therewith. CDF products are intended for single use application. Any reuse of the liner and/or fitment voids the warranty.